基于语义相似度计算的航天标准关联度评价

随着航天领域各级各类标准编制数量的逐年递增，相关标准之间的交叉重复制定问题随之而来。为解决该问题，文中通过计算语义相似度的方法开展航天领域标准名称、标准范围及主要内容的关联度评价。算例分析结果表明，该方法可以有效评估标准间的关联程度。     

Flow mechanism between purge flow and mainstream in different turbine rim seal configurations

The rim seal is used to prevent mainstream ingestion to the gap between the vane of a turbine and its blade. In this article, the dolphin lip with a hook configuration and a large seal cavity with hook structures are designed based on the high-pressure turbine datum single shark lip rim seal configuration. The sealing effect and parameters of the flow field are measured by an experiment method and a numerical simulation is used to explain the mechanism. For three configurations, the effect of the leakage slot vortex on the efficiency of the seal and the influence of leakage vortex, generated by the interaction between purge flow and mainstream flow, are discussed in depth. The result shows that the reverse vortex formed by the dolphin lip rim seal with hook structure will increase the sealing efficiency. The seal configuration with a large cavity improves sealing efficiency to a greater extent than the datum structure. At different purge flow rates and with unequal seal structures, the purge flow produces three types of leakage vortices in the passage. Besides, the seal configuration with dolphin lip produces a Kelvin-Helmholtz instability at the interface of the purge and the mainstream flows at a low purge flow rate to induce new leakage vortex branches in the passage of the blade.     

基于纳米吸能流体的火工点式分离装置缓冲技术研究

运载火箭火工点式分离装置工作时具有强冲击载荷特性，为有效降低冲击峰值，提出了一种基于纳米吸能流体结构的冲击缓冲技术。首先进行纳米吸能流体的吸能原理研究，建立其本构关系，揭示影响其吸能密度的主要因素；其次开展火工装置有限空间内的纳米吸能流体缓冲结构设计；最后通过有限元仿真与试验验证其缓冲性能。试验结果表明，本文设计的基于纳米吸能流体的缓冲结构，吸能密度高达122.8 J/g，冲击力峰值较空载条件下降了59.2%，冲击加速度峰值下降了63.4%。     

高压高速电机通风与散热分析

针对YKS规格的高压高速电机单机容量高、局部温升大等特点,以1台YKS5602 3 000 kW规格的高压高速电机为例,依据电机实际尺寸,建立了电机端部绕组及定转子模型。采用有限元法对流体场与温度场进行了仿真,计算出电机运行时各个通风槽内冷却气体流动情况,并对电机整体进行流固耦合分析,得到高压电机端部绕组及定转子温度场分布。对仿真计算结果分析,并与样机试验数据比较,结果表明:流体场和温度场耦合的方法能够准确地了解YKS电机各个通风槽内的气体流动情况及电机内局部温升分布。     

主流攻角对双射流孔气膜冷却特性的影响

应用压力敏感漆技术,在平板上测量了不同主流攻角(i=-30°,-20°,-10°,0°,10°,20°,30°)下双射流孔的气膜冷却效率,并利用计算流体动力学(CFD)计算得到的流场对气膜冷却效率的规律进行了解析。所研究的双射流孔结构的孔间无量纲横向距离为0.5,孔间无量纲流向距离为3;射流与主流密度比为1.0,吹风比分别为0.5、1.0、1.5、2.0。结果表明小的主流攻角(i=-10°,0°,10°)下,流场中存在反肾型涡对或挤压作用,气膜层与壁面贴附良好,气膜冷却效率最高;大正值攻角(i=20°,30°)下,虽然气膜覆盖面积大,但反肾型涡对退化,气膜冷却效率下降;大负值攻角(i=-20°,-30°)下,流场中有肾型涡对,且气膜横向覆盖受限,气膜冷却效率最低。     

Development process of muzzle flows including a gun-launched missile

Numerical investigations on the launch process of a gun-launched missile from the muzzle of a cannon to the free-flight stage have been performed in this paper. The dynamic overlapped grids approach are applied to dealing with the problems of a moving gun-launched missile. The high-resolution upwind scheme(AUSMPW+) and the detailed reaction kinetics model are adopted to solve the chemical non-equilibrium Euler equations for dynamic grids. The development process and flow field structure of muzzle flows including a gun-launched missile are discussed in detail.This present numerical study confirms that complicated transient phenomena exist in the shortly launching stages when the gun-launched missile moves from the muzzle of a cannon to the freeflight stage. The propellant gas flows, the initial environmental ambient air flows and the moving missile mutually couple and interact. A complete structure of flow field is formed at the launching stages, including the blast wave, base shock, reflected shock, incident shock, shear layer, primary vortex ring and triple point.     

不同类型多级等离子体激励器诱导气流的力学特性研究

等离子体激励器通过产生的等离子加速气流,可以实现对流动的控制。单级等离子体激励器由于受到等离子体放电的物理限制,其控制作用较小;为了提高等离子体流动控制的效果,关于多级等离子体激励器的研究得到发展。采用图像采集和粒子示踪测速系统(PIV),对传统多级等离子体激励器和多级双极性等离子体激励器的放电现象以及气流加速进行研究,并通过流场速度分布计算等离子体激励器对空气产生的推力和吸力。结果表明:随着电压的升高,传统多级等离子体激励器产生的推力和吸力会逐渐减弱;而多级双极性等离子体激励器产生的推力和吸力均呈逐渐增强的趋势。     

出口封闭的冲压发动机进气道激波振荡现象

采用计算流体力学和风洞试验两种手段,对冲压发动机出口封闭的多种超声速进气道内通道气流振荡现象进行了研究。结果表明,在一定的超声速范围内,封闭的进气道内通道发生了较强气流振荡现象,振荡频率、幅值和内通道长度、飞行马赫数有关,该振荡现象是一种自激振荡现象。利用亥姆霍兹共振器频率公式可以对封闭的进气道内通道振荡频率进行预估,并对其归纳出一种修正方法,可以结合模型试验结果对进气道和燃烧室内流振荡频率和幅值进行分析,为飞行试验提供预估和参考。     

固体燃料冲压发动机旋流燃烧特性数值研究

为了研究固体燃料冲压发动机旋流燃烧特性,使用数值模拟方法计算了不同旋流数下的燃速、燃烧效率、推力与比冲。固体燃料为丁羟,燃烧采用总包反应与涡团耗散模型。当旋流数小于临界旋流数时,无需将旋流器出口伸入燃烧室,突扩台阶回流区即可稳定火焰;当旋流数大于临界旋流数后,须将旋流器出口伸入燃烧室一段距离,使火焰稳定在这一段区域内。旋流状态燃烧效率低于直流状态,在考虑了旋流产生的总压损失后,发动机推力与比冲也低于直流状态。     

含缺陷结构非概率可靠性分析方法研究

将基于分段描述的结构非概率可靠性模型引入含缺陷结构的可靠性分析,结合断裂判据,并用分段描述模型刻画未确知变量,实现了非概率的断裂力学分析,克服了概率断裂力学方法对原始数据要求高的局限和未确知信息区间均匀分布模型过于保守的缺陷,有效解决了含裂纹结构在小样本、贫信息场合的可靠性评定问题.通过算例,对文中方法的可行性和有效性...